hk us //media.accobrandspartner.com/sections/leadimage.aspx?sku=THESKU&width=THEWIDTH&height=THEHEIGHT&language=us&publicSite=1&brandID=6
We are showing you the Hong Kong version of our website… would you prefer a different version?

EVAP Wet Electronics Rescue Pouch™

Rescue your wet electronics before it's too late!

EVAP Wet Electronics Rescue Pouch™




This Bundle Includes

About This Product

Studies show that 2 of 3 people will get their smartphone wet. For a fraction of that cost, you can rescue your wet electronics with the Kensington EVAP kit. EVAP contains a unique drying agent that safely removes the moisture from sensitive electronics preventing damage while restoring use -- fast!

There are no current solutions that are 100% effective. Change the outcome of your next accident with EVAP, engineering new outcomes for tomorrow's water accidents.


  • Rescue your wet electronics before it´s too late!
  • 700% more effective at removing moisture than rice
  • For best results allow 6-24 hours and simply wait for the humidity indicator to signal that it´s ready



  • UPC: 085896397236
  • Color Group: White


1 yearYou can get further information on warranties by viewing our Warranty Information page.

Case studies

Product support
  • Step 1

    Step 1

    Turn off electronic device and remove battery immediately, chips

    and SIM cards (if accessible).

  • Step 2

    Gently pat any moisture from the

    surface of the device and any other pieces with clean dry towel.

    Step 2
  • Step 3

    Step 3

    Tear open the EVAP white pouch at tabs above zip-closure and remove the two small drying agent pouches inside of the EVAP bag. Remove each drying agent pouch from the clear sealed protective outer bag.

  • Step 4

    Immediately place the wet device and any pieces vital to its operation (back cover may be included) inside the EVAP bag with one drying agent pouch on either side of device.

    Step 4
  • Step 5

    Step 5

    Tightly seal the EVAP bag and leave in a safe place for 6-24 hours (allow up to 48 hours for soaked devices). Remove the device when the humidity indicator (the water drop inside Blue Cross on the bag) turns back to brown. Humidity indicator will start out brown and turn light blue once the wet device is inserted into bag. Be careful to keep the wet device near the bottom of the bag

    and not directly touching the humidity indicator. Once the humidity indicator on the front turns back to brown, the device should be completely dry.